What Is Powder Coated Steel?
Industrial-grade surface treatment that delivers superior durability, beauty, and environmental benefits
The Definition
Powder coated steel is metal that has been treated with a dry powder coating through electrostatic spray application, then cured in a high-temperature oven to create a hard, uniform protective layer. Unlike liquid paint, the powder is 100% solid material with zero VOC emissions.
This process creates a coating 60-120 micrometers thick that bonds chemically with the steel surface, providing exceptional durability for 10-15+ years.
6 Core Advantages
High Corrosion Resistance
1000+ hours salt spray protection. Ideal for outdoor, coastal, and industrial environments.
Superior Aesthetics
100+ standard colors + unlimited custom colors. Matte, semi-gloss, or high-gloss finishes available.
Eco-Friendly
Zero VOC emissions. 95%+ powder recovery & reuse. Complies with strictest environmental standards.
Cost Advantage
30-40% lower cost per unit vs. liquid paint. Higher material utilization, zero waste.
Production Efficiency
60-80% faster throughput. Automated systems reduce labor costs and ensure consistent quality.
Uniform Coverage
Flawless, even coating on complex shapes. No drips, runs, or missed spots. 99.9% defect-free.
Powder Coating vs Traditional Methods
See how powder coating outperforms paint, galvanizing, and other coating techniques
Powder Coating
Corrosion Resistance
1000+ hrs salt spray
Appearance
100+ colors, flawless
Environment
Zero VOC, 95% recovery
Cost Efficiency
30-40% lower per unit
Speed
Fast, automated
Best for: High-volume production, outdoor use, design-focused products
Liquid Paint/Spray
Corrosion
300-500 hrs
Appearance
Good, but may drip
Environment
High VOC, toxic
Cost
Higher per unit
Speed
Slower, manual heavy
Best for: Small batches, custom colors, quick touch-ups
Hot Dip Galvanizing
Corrosion
20-50 yrs (extreme)
Appearance
Gray, industrial only
Environment
Zinc vapors, waste
Cost
Expensive, batch process
Speed
Slow, rigid timing
Best for: Extreme outdoor, maximum durability needed
Anodizing (Aluminum)
Corrosion
Good for aluminum
Appearance
Limited colors
Environment
Toxic chemicals, waste
Cost
High equipment cost
Speed
Slow chemical process
Best for: Aluminum products only
Why Powder Coating Wins
Powder coating delivers the best balance of corrosion protection, aesthetic appeal, environmental safety, and cost efficiency. It outperforms liquid paint on durability and environmental impact, while offering better design flexibility than galvanizing at a fraction of the cost.
For manufacturers seeking premium quality, sustainability, and production speed—powder coating is the modern standard.
Ready to explore powder coating for your products?
Powder Coated Steel Applications
Serving 10+ industries worldwide. See which one matches your business.
Metal Furniture
Office chairs, industrial shelving, outdoor furniture
View Cases →
Electrical Cabinets
Distribution boxes, control panels, switchgear enclosures
View Cases →
Storage & Racks
Warehouse racks, industrial shelving, pallet racks
View Cases →
Building Materials
Railings, fasteners, handrails, architectural metal
View Cases →
Mechanical Components
Frames, brackets, housings, structural parts
View Cases →
Outdoor & Advertising
Signage, poles, billboards, light structures
View Cases →![Home appliance parts with powder coating - frames and housings](https://www.powdercoatlinekt.com/wp-content/uploads/2026/01/production-line-101-scaled.webp")
Home Appliances
Refrigerator panels, washer frames, AC housings
View Cases →
Elevators & Escalators
Guide rails, frames, car panels, structural components
View Cases →
Electronic Products
Server enclosures, instrument housings, IT equipment
View Cases →Don't See Your Industry?
We work with manufacturers in countless sectors. Tell us your industry and product type.
The Powder Coating Process
From raw steel to finished product: Step-by-step breakdown of our coating process
Surface Cleaning
Remove oil, rust, and contaminants through alkaline cleaning or spray degreasing.
Temperature: 60-80°C
Time: 5-10 minutes
Pre-treatment
Chemical phosphate coating enhances adhesion and corrosion resistance.
Process: Acid wash + Phosphate
Time: 5-8 minutes
Drying
Remove excess moisture to ensure perfect powder adhesion and coating quality.
Temperature: 60-80°C
Time: 3-5 minutes
Electrostatic Spray
Powder particles charged and attracted to grounded steel surface via electrostatic field.
Voltage: 80-100 kV
Coverage: 95%+ in one pass
Curing Oven
High-temperature heating causes powder to melt, fuse, and chemically cross-link into hard coat.
Temperature: 180-200°C
Time: 10-15 minutes
Cooling
Product cooled to ambient temperature, coating hardens into final durable finish.
Method: Air or water cooling
Time: 15-20 minutes
Inspection
Quality control: thickness measurement, adhesion testing, color/gloss verification.
Standards: ASTM, ISO
Defect Rate: < 0.5%
Packaging
Final product carefully packaged to prevent damage during storage and transport.
Protection: Foam, paper, pallets
Labeling: QC certified
Steps 1-2: Cleaning & Pre-treatment
Steps 4: Electrostatic Spray
Step 5: Curing Oven
Steps 7-8: Inspection & Packaging
Process Key Points
Complete Cycle Time
Approximately 1.5-2 hours from raw steel to finished product, depending on batch size and part complexity.
Uniform Thickness
Coating thickness achieves 60-120 micrometers across all surfaces, with exceptional uniformity on complex geometries.
Zero Waste
95%+ of unused powder is recovered via cyclone separators and recycled back into production, minimizing waste.
Want to see this process in action at our facility?
Our Powder Coating Equipment Solutions
From pretreatment to curing, we provide complete equipment systems designed to help you produce premium powder coated steel products efficiently and reliably.
Complete powder coating production line integration from raw material to finished product
Pretreatment System
Spray or immersion systems for degreasing, rust removal, phosphating, and passivation. Ensures perfect substrate preparation for optimal coating adhesion.
Powder Spray Booth
Manual, semi-automatic, or fully automatic spray systems with integrated powder recovery. Ensures uniform coating coverage with minimal powder waste.
Curing Oven
Electric or gas-fired ovens with precise temperature control and uniform heat distribution. Achieves perfect powder cross-linking and coating hardness.
Conveyor System
Chain-driven or roller-driven transport with adjustable speed. Seamlessly moves parts through all coating stages while maintaining production rhythm.
Powder Supply System
Continuous powder delivery with fast color switching and automatic cleaning. Maintains consistent powder flow to spray guns and minimizes downtime.
Control System
PLC-based automation with touch-screen interface. Manages all line parameters, monitors system status, and provides real-time diagnostics and logging.
Need a customized system for your specific requirements?
Our Manufacturing Facility
With 20+ years of experience and a state-of-the-art manufacturing facility, we design, engineer, and build every coating line in-house to ensure superior quality and reliability.
Years of Experience
Skilled Employees
Annual Output (Tons)
Satisfied Customers
In-House Design & Manufacturing
Complete control over every stage—from concept design through prototype testing to final assembly. This ensures superior quality and allows rapid customization.
Advanced Testing & Commissioning
Every line undergoes rigorous factory testing including powder spray verification, curing performance validation, and system diagnostics before shipment.
Fast Delivery & Logistics
Optimized production scheduling and partnerships with international logistics providers ensure on-time delivery. We handle documentation and clearance support.
Expert Team
-
✓
50+ Engineering & Technical Staff
Design, commissioning, and after-sales support
-
✓
150+ Production Workers
Skilled fabricators, welders, and assembly technicians
-
✓
Continuous Training
Regular upskilling in latest coating technology and practices
Quality Certifications
-
✓
ISO 9001:2015
Quality management system certified
-
✓
CE Compliance
All equipment meets European safety standards
-
✓
Environmental Standards
Meets GB and EPA environmental compliance requirements
Want to see our facility firsthand?
Beauty in Every Industry
Discover how powder coated steel transforms products across diverse industries with superior aesthetics, durability, and professional finishes.
Why 500+ Factories Trust Us
We're not just suppliers—we're your long-term partner in powder coating excellence, backed by 20+ years of manufacturing expertise and proven customer success.
20+ Years Manufacturing Excellence
Over two decades of expertise in designing, manufacturing, and commissioning powder coating equipment. We've perfected every detail through continuous innovation and customer feedback.
100% In-House Manufacturing
Every coating machine is designed and manufactured in our own facility. This gives us complete control over quality, functionality, and delivery timelines—no third-party compromises.
Complete System Integration
From pre-treatment to curing, we supply the entire coating line. No need to coordinate with multiple vendors. One integrated solution, one point of responsibility.
Customization at Scale
Every coating line is tailored to your production needs, product specifications, and factory layout. No "one-size-fits-all" approach—your unique requirements drive our design.
Superior Energy Efficiency
Our engineering focus reduces energy consumption and operating costs. Advanced automation and optimized air circulation mean lower monthly bills without sacrificing coating quality.
Comprehensive After-Sales Support
Installation, commissioning, staff training, 24/7 technical support, spare parts inventory, and preventive maintenance. We support you from day one through years of operation.
By The Numbers
Years in Business
Proven track record of quality and reliability
Happy Customers
Across 10+ industries worldwide
Team Members
Expert engineers and technicians
Annual Production Capacity
tons of virgin raw materials processed
Our Modern Facility
Our state-of-the-art facility features advanced metal fabrication, precision machining, complete assembly, and rigorous testing. Every machine is assembled, tested, and commissioned before shipment.
Delivery and Installation Support
From factory manufacturing to on-site installation and commissioning, we provide complete project delivery support and technical service guarantee
Delivery Process (6-8 weeks)
Order Confirmation
2 weeks
Design Evaluation
Factory Manufacturing
4-8 weeks
Assembly Testing
Quality Inspection
2-3 weeks
Factory Testing
Logistics Shipping
1-2 weeks
Safe Packaging
On-site Installation
1-2 weeks
Mechanical Connection
Commissioning Operation
3-5 days
Training Delivery
Professional Packaging and Logistics
- ✓ Professional wooden box packaging, shockproof and waterproof
- ✓ International logistics insurance coverage
- ✓ Real-time logistics tracking
- ✓ Complete customs clearance documents
On-site Installation and Commissioning
- ✓ Dispatch professional installation team
- ✓ 7-10 days to complete installation
- ✓ Electrical and pipeline connections
- ✓ Equipment commissioning and test line
Training and Technical Delivery
- ✓ 3-5 days on-site training
- ✓ Operator certification training
- ✓ Maintenance manual
- ✓ 24/7 Technical Support
Installation and Commissioning Site
Continuous After-sales Support
Standard Warranty 1 Year
Free repair and replacement for equipment manufacturing defects
Fast Spare Parts Supply
Common parts delivered in 1-2 days to ensure production is not interrupted
24/7 Technical Support
Phone, Email, WhatsApp, Remote video diagnosis
Extended Warranty Plan
2-3 year extended warranty available, transparent costs
Annual Maintenance Plan
Regular maintenance, performance testing, wearing parts replacement
Contact Technical Support
Phone (24/7)
+86-180-6466-8879
WhatsApp Instant Support
Same as above
Technical Email
ketucoatingline@gmail.com
Remote Video Diagnosis
Arranged as needed
Complete Guide to Procurement and Production of Powder Coated Steel
From awareness to procurement to production operation, help you make rational investment decisions. This guide covers 10 core topics, 8000+ words
①
Why Purchase Powder Coated Steel or Coating Lines?
Understand the business value and investment return of powder coating
+
Why Purchase Powder Coated Steel or Coating Lines?
Understand the business value and investment return of powder coating
Powder coated steel products are increasingly popular in the market. Whether you are a metal furniture manufacturer, electrical cabinet producer, or mechanical parts company, purchasing powder coating equipment can bring significant advantages to your business.
✓ Quality and Competitiveness Enhancement
Powder coated products have uniform appearance, rich color, and strong corrosion resistance. Compared to traditional painting or galvanizing, it can significantly enhance product image in customers' minds and enhance market competitiveness.
✓ Cost Control and Profit Margin
After building own coating line, unit coating cost is reduced from outsourced 20-30 yuan/piece to self-produced 10-15 yuan/piece. Calculated at 100,000 pieces per year, annual cost savings of 1-1.5 million yuan, investment return period is typically 1-2 years.
✓ Production Control and Delivery Capability
Own coating line ensures production independence and flexibility, not limited by outsourcing factory capacity, can quickly respond to order demands, improve delivery rate.
✓ Environmental Protection and Compliance
Powder coating has no VOC emissions, waste powder can be recycled, complies with GB 16297 and other environmental standards, helps companies pass environmental assessments, meet customers' green procurement requirements.
Recommendation: If your monthly output ≥ 500 pieces, annual capacity ≥ 6000 pieces, it is recommended to invest in own coating line.
②
What are the Procurement Channels for Powder Coating?
Compare direct procurement vs equipment investment pros and cons
+
What are the Procurement Channels for Powder Coating?
Compare direct procurement vs equipment investment pros and cons
Option A: Directly Purchase Powder Coated Steel Finished Products
Advantages:
- ✓ No need to invest in equipment
- ✓ Quick product acquisition
- ✓ Asset-light model
- ✓ Professional coating factory guarantees quality
Disadvantages:
- ✗ High unit cost (20-30 yuan/piece)
- ✗ Long delivery time (5-10 days)
- ✗ Limited color choice
- ✗ Limited quality control
Suitable for: Small output (monthly < 200 pieces), unstable demand, companies with limited budget
Option B: Purchase Coating Equipment and Produce Yourself
Advantages:
- ✓ Low long-term cost (10-15 yuan/piece)
- ✓ Production is independently controllable
- ✓ Free color choice
- ✓ Highly stable quality
- ✓ Increase product profit
Disadvantages:
- ✗ Large initial investment (200k-3M yuan)
- ✗ Requires site and infrastructure
- ✗ Management and maintenance cost
- ✗ Technical learning curve
Suitable for: Large output (monthly ≥ 500 pieces), have stable orders, companies pursuing long-term competitiveness
③
How to Choose the Right Coating Line Configuration?
Practical selection guide based on capacity, workpiece, and space
+
How to Choose the Right Coating Line Configuration?
Practical selection guide based on capacity, workpiece, and space
Choosing the right coating line configuration is key to investment success. The configuration of coating lines is determined by multiple factors:
Capacity Requirements
Calculate daily capacity requirements based on monthly order volume. For example, monthly orders of 10,000 pieces, calculated at 22 business days, daily capacity requirement ≈ 450 pieces/day. It is recommended to leave 20% spare capacity.
• Daily capacity < 200 pieces → Manual spray booth (Investment 200k-500k yuan)
• Daily capacity 200-500 pieces → Semi-automatic line (Investment 500k-1.2M yuan)
• Daily capacity > 500 pieces → Fully automatic line (Investment 1.2M-3M yuan)
Workpiece Characteristics
Size, shape, weight of workpiece affect equipment selection.
• Small parts (< 100mm) → Requires special fixture design
• Large parts (> 1500mm) → Requires oversized spray booth or segmented processing
• Assembly parts (multiple components) → Requires platform or suspension system
Factory Site
Factory floor area, ceiling height, electrical, air supply capacity directly affects solution feasibility.
• Site 60-80m² → Basic manual line
• Site 100-150m² → Semi-automatic or compact fully automatic line
• Site 150-250m² → Standard fully automatic line
Product Diversity
Frequent color changes → Manual line has stronger advantages (fast color change); Single color high volume → Fully automatic lines are more efficient.
Expert advice: It is recommended to communicate your capacity, workpiece, site information with suppliers first, and have engineers do custom evaluation to avoid investment deviation.
④
Detailed Explanation of Core Equipment and Systems of Coating Lines
Understand the function and selection points of each system
+
Detailed Explanation of Core Equipment and Systems of Coating Lines
Understand the function and selection points of each system
Complete powder coating lines typically consist of 5 core systems. Each system has its own function to together ensure coating quality:
Pre-treatment System
Function: Degreasing, rust removal, phosphating, passivation, to prepare for powder adhesion. This is the most critical step, directly affecting coating quality and corrosion resistance.
Key Selection Points: Spray type (fast, efficient, suitable for standard parts) vs Immersion type (uniform, suitable for complex parts); Tank size should match workpiece size.
Spray Booth System
Function: Spray powder uniformly on workpiece surface. Coating uniformity, thickness, appearance quality is mainly determined by spray booth.
Key Selection Points: Manual spray booth (maximum flexibility, fast color change, low cost), Semi-automatic spray booth (efficiency and cost balance), Fully automatic spray booth (high efficiency, stable quality). Number of spray guns, spray width, powder recovery methods all affect results and costs.
Curing Oven
Function: Heat the sprayed powder at high temperature to melt, crosslink, and harden it. This is the key step in coating formation.
Key Selection Points: Electric oven (clean, easy to control, higher cost) vs Gas oven (low cost, low energy consumption, requires gas source). Oven chamber size, temperature uniformity, insulation effect, energy consumption should all be compared. Typical process parameters: 180-200℃, 8-15 minutes.
Conveyor System
Function: Transfer workpieces between processes. Speed, load capacity, reliability of conveyor system directly affects capacity.
Key Selection Points: Chain conveyor (common, heavy load) vs Roller conveyor (stable, suitable for small parts). Adjustable conveyor speed (typically 3-15 m/min), capacity = workpiece spacing × conveyor speed ÷ number of processes.
Supporting Systems
Includes powder supply, compressed air, electrical control, exhaust dust removal, etc. No step can be omitted.
For example, compressed air system requires 0.7-0.9 MPa, flow 500-800 L/min, requires dryer and filter configuration; exhaust system needs to comply with environmental standards, usually configured with cyclone recovery or multi-stage filter.
⑤
Composition of Coating Line Procurement Costs and ROI Analysis
Investment return period is typically 1-3 years
+
Composition of Coating Line Procurement Costs and ROI Analysis
Investment return period is typically 1-3 years
One-time Investment Cost
Annual Operating Cost (calculated at 500 pieces/day, 250 business days)
Investment Return Analysis
Taking 1M yuan semi-automatic line as example:
Gross Margin Assumption: Typical gross margin of powder coated products 30-50%
Annual Capacity: 1.25M pieces, calculated at 40% margin
Annual Gross Profit: 1.25M pieces × 15 yuan/piece (cost difference) × 40% ≈ 750k yuan
Annual Net Profit: 750k - 650k (operating cost) = 100k yuan
Investment Return Period: 1M ÷ 100k/year = 10 years (longer, but actual capacity is usually higher)
Note: The above example is conservative. In practice, if fully utilizing capacity (achieving 70-80% utilization rate), lower powder cost, higher product selling price, payback period can be shortened to 1-2 years.
⑥
Supplier Selection and Procurement Considerations
6 standards to help you select reliable partners
+
Supplier Selection and Procurement Considerations
6 standards to help you select reliable partners
Choosing the right supplier is more important than choosing the equipment itself. A reliable supplier not only provides equipment, but also provides long-term technical support and cooperation.
1. Manufacturing Strength
Whether they have their own manufacturing workshop, machining equipment, spray test line. Real manufacturers can better understand customer needs and provide custom solutions.
→ Recommendation: Request factory visit, view production capability
2. Technical Level and Experience
20+ years of industry experience, have engineer team, can understand powder coating process, can do custom design based on customer products.
→ Recommendation: Ask about coating process details, examine the professionalism of engineers
3. Product Quality and Reliability
Equipment failure rate, wearing parts cost, maintenance cycle. Poor quality equipment will constantly cause problems in operation, repeated repair costs are huge.
→ Recommendation: Request reference customer list, directly consult other users
4. Delivery Capability and International Service
Delivery time, logistics support, international installation service, cross-timezone support capability.
→ Recommendation: Confirm delivery time, logistics packaging, on-site installation cost
5. After-sales Service and Support
Technical support channels (phone, email, video), response time, remote diagnosis capability, spare parts supply, warranty policy, maintenance plan.
→ Recommendation: Clearly written into the procurement contract to avoid later disputes
6. Customer Reputation and Success Stories
Number of customers served, customer repeat order rate, industry recognition, certifications obtained.
→ Recommendation: Request at least 3 reference customer contact information, consult in person
Common Procurement Pitfalls (Avoid!)
- Only looking at price and ignoring quality → Low-priced equipment fails frequently, high maintenance cost
- Ignoring installation and commissioning cost → Installation may cost extra 100k-200k yuan
- Underestimating training and maintenance cost → Personnel training, equipment maintenance requires continuous investment
- Cooperating with small manufacturers → Unstable technical support, difficult spare parts supply
- Not confirming delivery time → Delayed delivery disrupts production plans
- Unclear warranty terms → Later maintenance costs are extremely high
Hope this guide helps your decision. If you still have specific questions, welcome to consult our engineer team directly.
FAQ
Quickly find answers to powder coating and coating line procurement
Basic Knowledge of Powder Coating
What is the Difference Between Powder Coating and Paint Spraying? ▼
Powder coating is solid powder, paint is liquid. Powder adheres through electrostatic attraction and cures at 180-200℃ high temperature to form coating; paint relies on solvent evaporation. Advantages of powder coating: thicker coating, more uniform, no VOC pollution, stronger corrosion resistance, longer service life (typically 2-3 times that of paint). Disadvantages: larger initial investment, more complex production process.
What Products Can Powder Coating be Used On? ▼
Almost all metal products can: metal furniture, electrical cabinets, mechanical components, storage racks, architectural hardware, outdoor products, home appliance housings, etc. Workpiece size from screws (5mm) to large cabinets (3000mm) can all be handled, just need to design appropriate process and fixtures according to workpiece characteristics.
How Long is the Lifespan of Powder Coating? ▼
Indoor use 10-15+ years without visible fading. Outdoor use 5-10 years (depends on climate). In salt spray environments (such as coastal areas), can achieve 500-2000+ hours salt spray test standard based on coating thickness. Regular cleaning and maintenance can significantly extend service life.
Can the Color and Gloss of Powder Coating be Customized? ▼
Completely possible. 100+ standard colors, unlimited customization. Gloss includes matte (GU ≤ 10), semi-gloss (GU 20-40), high gloss (GU > 80) multiple choices. Can also do metallic colors, pearlescent colors, transparent powder and other special effects. Custom colors typically require 3-4 weeks delivery.
Can Powder Coating be Used Outdoors? ▼
Completely possible, outdoor durability is superior to paint. Strong UV resistance, not easy to fade; excellent rust prevention, especially suitable for salt spray environments. It is recommended that outdoor products choose thicker coating (80-120 μm) to improve durability, regular cleaning (once every six months) can significantly extend service life.
Coating Line Configuration and Selection
What is the Difference Between Manual and Automatic Spray Booths? ▼
Manual Spray Booth: 50-200 pieces/day, investment 200k-300k yuan, high flexibility, fast color change (10-20 minutes).
Automatic Spray Booth: 800-2000+ pieces/day, investment 800k-2M yuan, high efficiency, stable quality, color change requires 1-2 hours.
Selection Criteria: Monthly output < 1000 pieces → Manual; 1000-3000 pieces → Semi-automatic; > 3000 pieces → Fully automatic.
My Factory Space is Only 100m², Can it Fit a Coating Line? ▼
Yes. 100m² can fit basic manual line or compact semi-automatic line. The key is to communicate with suppliers about factory size, ceiling height, electrical capacity, and do custom layout design. If ceiling height ≥ 4m, can also be arranged in multiple layers to improve space utilization. It is recommended to consult an engineer first to conduct feasibility assessment.
Can Coating Lines Use Different Color Powders? ▼
Completely possible. Color change requires powder cleaning process. Semi-automatic line color change time 30-45 minutes, fully automatic line 1-2 hours. Powder cleaning cost approximately 200-500 yuan/time. It is recommended to use the same color in the same shift as much as possible, or use 1-2 alternating similar colors to avoid color contamination. If multi-color production is needed, can configure multiple spray booths or time-slot switching.
What Kind of Power and Air Supply Does a Coating Line Need? ▼
Power Supply: Typically 380V/3-phase/50Hz, power 30-100kW (according to configuration).
Air Supply: 0.7-0.9 MPa compressed air, flow 500-800 L/min, requires dryer and filter.
It is recommended to consult power and air supply capacity in advance, configure UPS backup power to ensure stability.
Procurement and Cost
How Much Investment is Needed to Purchase Powder Coating Lines? ▼
Manual line 200k-500k yuan, Semi-automatic line 500k-1.2M yuan, Fully automatic line 1.2M-3M+ yuan. Price depends on capacity, configuration, automation level and domestic and international installation support. Payment is typically 30% deposit, 40% medium term, 30% final payment. Support installment and financing lease.
What is the Monthly Operating Cost of a Coating Line? ▼
Powder cost 3-8 yuan/m²; Energy cost 0.5-1 yuan/piece; Labor cost 6000-12000 yuan (2-4 people); Maintenance 500-1000 yuan/month. Total monthly cost approximately 50k-100k yuan. Unit cost approximately 10-20 yuan/piece (depends on workpiece size). Investment return period is typically 1-3 years.
Can Coating Lines be Paid in Installments? ▼
Supported. Standard solutions typically support 3-5 installment periods. Can also cooperate with financial companies for 36-60 month lease. Specific terms negotiated based on customer credit and project scale. It is recommended to consult the business department for financing solutions.
Installation, Delivery and After-sales
How Long is the Delivery Time for Coating Lines? ▼
Standard configuration 4-6 weeks, Fast delivery (urgent) 2-3 weeks, Customized solution 6-8 weeks. Delivery time includes design, manufacturing, assembly, testing. Customers can view production progress at any time. It is recommended to negotiate 8-12 weeks in advance to lock in delivery date.
How Long Does It Take to Install a Coating Line? ▼
Basic installation 7-10 days, Electrical connections 3-5 days, Test line commissioning 3-5 days, Total 2-3 weeks. Customers need to provide infrastructure (power source, air source, exhaust) and work site. It is recommended to prepare installation site 1 month in advance.
Is there After-sales Service or Warranty? ▼
Standard warranty 1 year, 2-3 year extended warranty available. Warranty covers manufacturing defects, does not include wearing parts. Annual maintenance plan available, includes regular maintenance, performance testing, wearing parts replacement.
What if it Breaks? How Long Does it Take for Spare Parts to Arrive? ▼
Common fault parts in stock, shipped in 1-2 days. Rare parts require 1-2 weeks manufacturing. Urgent processing can produce in 3-5 days. Serious failures can be repaired by engineers on-site. It is recommended to establish backup inventory of key parts to ensure production is not interrupted.
English 
German 
Vietnamese 
French